(A) CVT
(B) circuit breaker
(C) current transformer
(D) lightning arrester
Answer:(B) circuit breaker
Explanation:
A circuit breaker is an automatically operated electrical switch designed to protect an electrical circuit from damage caused by overload or short circuit. Its basic function is to detect a fault condition and interrupt current flow.
1. Under over excitation synchronous phase modifier works as
2. The neutral of the power system may be connected to earth
3. The time to open the circuit breaker contact is called as
4. A 100 Ah capacity battery should deliver a current of 10 A for approximately _____ hrs.
5. For 400KV line, The Spacing Between phase conductor is around
6. Shunt capacitors in a sub-station
7. An alternator is said to be over excited when it is operating at
8. In case of transformer Buchholz relay is used to protect from
9. Series capacitors are used to
10. Disadvantage of low power factor is
11. The colour of neutral three core flexible cable is
12. The location of ground faults in underground cables can be found by
13. Fault location in an HV cable is done by
15. Which of the following is not a valid advantage of bundle conductor?
16. Star-star power transformer is protected by current transformer having
17. The surge resistance of cables is
18. Skin effect is only noticeable at _______ frequencies.
19. When transmission voltage is increased, the line losses are
20. Var compensators are used to